Home > Administrative Offices > Information Technology > Helpdesk > Step by Step Tutorials > Hallnet > Wireless Network Contents
XP Wireless Network Configuration
This is a guide for users attempting to connect to our campus network, Hallnet, using a wireless card, click the link directly below to begin the configuration and troubleshooting process. Use the table of contents if you need to continue configuration or troubleshooting from a specific point. Finally, click on the printable version link to download and save a PDF copy of the entire guide for later use.
Start XP Wireless Network Configuration
Table of Contents
- Step 1: Turning on your Wireless Device
- Step 2: Bringing up the Control Panel
- Step 3: Bring up the Network Connections Window
- Step 4: Removing Bridged Connections
- Step 5: Disable and Enable the Network Connection
- Step 6: Bring up the Wireless Connection Properties Window
- Step 7: Bring up the Internet Protocol Properties Window
- Step 8: Obtain all Values Automatically
- Step 9: Configure the Wireless Device
- Step 10: Enabling the Radio
- Step 11: Manage My Computer
- Step 12: Expand Services and Applications
- Step 13: View the Services List
- Step 14: Bring up the Wireless Zero Configuration
- Step 15: Set the Startup Type to Automatic
- Step 16: Start Wireless Zero Configuration
- Step 17: View Available Wireless Connections
- Step 18: Bring up the Wireless Networks Tab
- Step 19: Allow Windows to Configure Wireless Network Settings
- Step 20: Set the Wireless to Connect Only to Access Points
- Step 21: Remove Preferred Networks
- Step 22: Returning to View Available Wireless Networks
- Step 23: Refresh the Network List
- Step 24: Connecting to vsuhallnet
- Step 25: Bring up the Run Window
- Step 26: Check your IP Address
- Step 27: Release Your IP Address
- Step 28: Renew your IP Address
- Printable Version - Viewing and Printing PDFs require the use of Adobe Acrobat
