Home > Administrative Offices > Information Technology > Helpdesk > Step by Step Tutorials > Hallnet > Vista Wireless Contents
Vista Wireless Configuration
This is a guide for users attempting to connect to our campus network, Hallnet, using a wireless card and Windows Vista. Click the link directly below to begin the configuration and troubleshooting process. Use the table of contents if you need to continue configuration or troubleshooting from a specific point. Finally, click on the printable version link to download and save a PDF copy of the entire guide for later use.
Start Vista Wireless Configuration
Table of Contents
- Step 1: Turning on your Wireless Device
- Step 2: Bringing up the Control Panel
- Step 3: Bring up the Network Connections Window
- Step 4: Managing Network Connections
- Step 5: Disable and Enable the Network Connection
- Step 6: Bring up the Wireless Connection Properties Window
- Step 7: Bring up the Internet Protocol Properties Window
- Step 8: Obtain all Values Automatically
- Step 9: Configure the Wireless Device
- Step 10: Enabling the Radio
- Step 11: Manage My Computer
- Step 12: Expand Services and Applications
- Step 13: View the Services List
- Step 14: Bring up the WLAN AutoConfig Properties Window
- Step 15: Set the Startup Type to Automatic
- Step 16: Start WLAN Autoconfig
- Step 17: View Available Wireless Connections
- Step 18: Bring up the Wireless Networks Properties
- Step 19: Allow Windows to Configure Wireless Network Settings
- Step 20: Remove Preferred Networks
- Step 21: Returning to Connect to a Network
- Step 22: Refresh the Network List
- Step 23: Connecting to vsuhallnet
- Step 24: Bring up the Run Window
- Step 25: Check your IP Address
- Step 26: Release your IP Address
- Step 27: Renew Your IP Address
- Printable Version - Viewing and Printing PDFs require the use of Adobe Acrobat
