Home > Administrative Offices > Information Technology > Helpdesk > Step by Step Tutorials > Hallnet > Wired Network Contents
Vista Wired Network Configuration
This is a guide for users attempting to connect to our campus network, Hallnet, using a length of network cable in the residence halls, click the link directly below to begin the configuration and troubleshooting process. This guide is designed for users with Windows Vista. Use the table of contents if you need to continue configuration or troubleshooting from a specific point. Finally, click on the printable version link to download and save a PDF copy of the entire guide for later use.
Vista Wired Network Configuration
Table of Contents
- Step 1: Checking the Cable
- Step 2: Bring up the Control Panel
- Step 3: Bring up the Network Connections Window
- Step 4: Removing Bridged Connections
- Step 5: Disable and Enable the Network Connection
- Step 6: Bring up the Local Area Connection Properties Window
- Step 7: Bring up the Internet Protocol Properties Window
- Step 8: Obtain all Values Automatically
- Step 9: Bring up the Run Window
- Step 10: Check your IP Address
- Step 11: Release your IP Address
- Printable Version - Viewing and Printing PDFs require the use of Adobe Acrobat
