Home > Administrative Offices > Information Technology > Helpdesk > Step by Step Tutorials > Hallnet > Wired Network Contents
XP Wired Network Configuration
This is a guide for users attempting to connect to our campus network, Hallnet, using a length of network cable in the residence halls, click the link directly below to begin the configuration and troubleshooting process. Use the table of contents if you need to continue configuration or troubleshooting from a specific point. Finally, click on the printable version link to download and save a PDF copy of the entire guide for later use.
Start XP Wired Network Configuration
Table of Contents
- Step 1: Checking the Cable
- Step 2: Bring up the Control Panel
- Step 3: Bring up the Network Connections Window
- Step 4: Removing Bridged Connections
- Step 5: Disable and Enable the Network Connection
- Step 6: Bring up the Local Area Connection Properties Window
- Step 7: Bring up the Internet Protocol Properties Window
- Step 8: Obtain all Values Automatically
- Step 9: Bring up the Run Window
- Step 10: Bring up the Command Prompt Window
- Step 11: Check your IP Address
- Step 12: Release your IP Address
- Step 13: Renew your IP Address
- Printable Version - Viewing and Printing PDFs require the use of Adobe Acrobat
