Vibe - BATTERY INFORMATION

· Type of Battery: Two rechargeable "AA" batteries are included. Standard "AA" batteries may also be used.
· Battery Charge Time: 7-8 hours.
· Battery Charge Life: 10 hours of playing time.


MACHINE BASICS

ORIENTATION: The Victor Reader Vibe has 11 keys arranged in a circle like the face of a clock. Position the Vibe so that the double-embossed line is at 12 o'clock.



Turning the Victor Reader Vibe On and Off 

ON: Press the UP key located at 1 o'clock. You will hear "Welcome to Victor." 
OFF: Press and hold the DOWN key located at 2 o'clock. You will then hear a beep just before powering off.

NOTE: Make sure the Hold Switch, located on the right side of the player, is in the" OFF" position when powering on the unit. The machine will not power on when the Hold Switch is in the "ON" position.




To Insert a CD · Slide the button in the front of the unit toward the back to open the clamshell CD-ROM drive.
· Place the CD, label side up, so that it fits over the center knob and close the clamshell.
· After a few seconds, Victor Reader Vibe will read the title of the book and, after a beep, if the CD is inserted properly, you will hear the prompt to enter your RFB&D Personal Identification Number (PIN).
. The LCD screen will display "Validation required." · Enter PIN using the numerical keypad and press the SET key located at 11 o'clock. You will hear "Reading disc, please wait."


To Eject a CD Slide the button in the front of the unit towards the back to open the clamshell CD-ROM drive and lift out the CD.


To Play or Stop a CD To start playing a book, press the PLAY/STOP key located at 5 o'clock. To stop, press the PLAY/STOP key again.


To Adjust the Speed · Press the VOLUME/SPEED toggle key located at 3 o'clock to selec~specd.
· Press the UP key located at 1 o'clock to increase the speed.
· Press the DOWN key located at 2 o'clock to decrease the speed.


NOTE: Speed ranges from two-thirds to almost three times the normal speed.


To Adjust the Volume · Press the VOLUME/SPEED toggle key located at 3 o'clock to select volume.
· Press the UP key located at 1 o'clock to increase the volume.
· Press the DOWN key located at 2 o'clock to decrease the volume.


The volume level is saved at the end of each session, but the speed is automatically reset to its default value.