USING THE T30 TRANSMITTER

1. Make sure there are two charged AA batteries in the transmitter. If batteries are not installed, see Battery Illformation on page 10.

2. Plug the microphone cord into the "Mic" jack on top of the Transmitter.

3. Place the Transmitter in the belt clip case provided.

4. Turn the power switch on top of the Transmitter to "On."

5. Clip the microphone onto a collar, lapel, or tie. It should be as close to the speaker's mouth as is practical. 


The transmitter can be placed in a pants pocket, or clipped onto a belt or waistband. Make sure the Transmitter is turned OFF when not in use.

The PFM System 300/350 comes with an omnidirectional. lapel-clip style microphone. It should be clipped to a collar, lapel. tie, or neckline as close to the mouth as possible and centered on the body as shown.

Note On The Transmitter Antenna:
The microphone cord is the transmitting antenna. Do not bunch up the cord or wrap it around the transmitter. For maximum range, the cord should hang as straight as possible.